Step by Step How to Instructions

LAY BOTH THE HOLSTER AND THE AAP-101 SIDE BY SIDE, BOTH FACING FORWARD.

DETACH AND REMOVE THE STIRRUP STRAP FROM THE INSIDE BACK WALL OF HOLSTER, LAY FLAT WITH THE FRONT FACING FORWARD, NEXT SEPERATE THE BELTLOOP ON THE AAP-101 LAY FLAT AND FACE FORWARD.

FOLD THE STIRRUP STRAP UP ONTO THE FRONT WALL OF THE HOLSTER TO REMOVE OUT OF THE WAY FOR NOW, THEN INVERT THE AAP-101, LAY FLAT WITH THE BACK WALL FACING FORWARD.

INSERT THE TOP PORTION OF THE AAP-101’S BELTLOOP INTO THE HOLSTER’S POCKET, STOP ONCE THE PASS-THROUGH SLOT ON THE TOP PORTION OF THE BELTLOOP REACHES THE BOTTOM EDGE OF THE HOLSTER’S POCKET.

INSERT AND FEED THE STIRRUP STRAP THROUGH THE PASS THROUGH-SLOT ON THE TOP PORTION OF THE BELTLOOP AND CONTINUE PULLING THROUGH UNTIL THE FRONT WALL’S BOTTOM EDGE REACHES THE PASS THROUGH-SLOT OPENING.

FOLD THE AAP-101 DOWN OVER THE FRONT OF THE HOLSTER’S POCKET AND BRING THE BELTLOOP BACK INTO A CLOSED POSTION, AFFIX VELCRO PATCHES ON INSIDE WALLS PRESS FIRMLY THE SECURE IN PLACE.

FOLD AND INSERT OPEN END OF THE STIRRUP STRAP BACK INTO THE HOLSTER’S POCKET AND ATTACH TO THE BACK WALL AT A SET HEIGHT TO BEST FIT YOUR TWO-WAY RADIO.

LOAD UP THE AAP-101 WITH YOUR ESSENTIAL TOOLS. INSERT YOUR TWO-WAY RADIO INTO THE HOLSTER, SNAP THE UPPER SECURING CORDAGE TO AAP-101 TO COMPLETE THE STEP BY STEP INSTRUCTIONS FOR LINKING AND SECURING THE AAP-101 TO THE HOLSTER POCKET.